125mm Dritherm Slab 32 is a high-performance insulation solution for residential and commercial buildings. It is designed to provide excellent thermal and acoustic insulation for cavity walls.

This product is made of highly resilient and non-combustible mineral wool material. The wool is manufactured from a blend of naturally occurring rock and recycled glass, which makes it an environmentally friendly choice. 125mm Dritherm 32 is designed for use in cavity walls.

The Benefits of using Knauf 125mm Dritherm 32

One of the key benefits of this product is its excellent thermal performance. It has a thermal conductivity of 0.032 W/mK, which means it can provide high levels of insulation and help reduce energy consumption. This makes it ideal for use in both new and existing buildings that require insulation upgrades.

Another benefit of Knauf Dritherm 125mm Cavity Slab 32 is its acoustic performance. It has a high-density structure that can effectively absorb sound waves and reduce noise transmission. This makes it an excellent choice for buildings located in noisy areas or those that require a quiet environment, such as hospitals or schools.

This product is also easy to install. It comes in pre-cut sizes that fit perfectly into standard cavity walls. The slabs are designed to be friction-fitted, which means they can be easily pushed into place without the need for any adhesive or mechanical fasteners. This makes installation quick and hassle-free, saving time and reducing labour costs.

Knauf Dritherm 32 125mm is a safe and durable insulation solution. It is non-combustible, which means it does not contribute to the spread of fire. It is also resistant to moisture, which means it will not sag or slump over time. This ensures that it maintains its thermal and acoustic performance for the lifetime of the building.

In addition, Knauf 125mm Dritherm 32 is environmentally friendly. The product is manufactured using sustainable materials and has a low environmental impact. It is also recyclable, which means it can be reused at the end of its life cycle.

Installing 125mm Knauf Dritherm Cavity Slab 32

Installing 125mm Knauf Dritherm Ultimate Cavity Slab 32 is a straightforward process that can be carried out by a competent DIY enthusiast or a professional contractor. Here are the general steps involved:

• Preparation: Before installing the insulation, it’s essential to ensure that the cavity wall is clean and free from any debris or protrusions that could affect the insulation’s performance. Any existing insulation should be removed to make way for the new installation.
• Cutting the insulation: Knauf Dritherm Ultimate Cavity Slab 32 – 125mm comes in pre-cut sizes that fit standard cavity walls. However, if necessary, the insulation can be cut using a sharp knife or saw to fit any irregular spaces.
• Installing the insulation: The insulation is designed to be friction-fitted into the cavity wall. Start by placing the insulation at the bottom of the cavity, ensuring that it fits snugly. Then work your way up, filling the cavity with insulation until it is completely filled. Ensure that the insulation is flush with the surface of the inner leaf.
• Finishing: Once the insulation is installed, it’s important to ensure that the cavity is sealed to prevent any air leakage. Seal any gaps or holes with a suitable sealant or tape. Finally, replace any removed skirting boards or architraves.

It’s worth noting that proper safety precautions should be taken when handling insulation, including wearing protective clothing, gloves, and goggles. If you’re not confident in carrying out the installation yourself, it’s best to hire a professional contractor to ensure that the insulation is installed correctly and safely.

Correctly storing 125mm Dritherm 32

Proper storage of Knauf Dritherm Ultimate Cavity Slab 32 (125mm) is essential to maintain its quality and performance. Here are some tips on how to store the insulation correctly:

Store the insulation in a dry and secure location: Moisture can affect the insulation’s performance and cause it to sag or slump over time. Therefore, it’s important to store the insulation in a dry location away from any potential sources of moisture. The storage area should also be secure to prevent any damage or theft.

Keep the insulation off the ground: To avoid any potential moisture damage, store the insulation off the ground on pallets or racks. This will also make it easier to access and transport the insulation when needed.

Protect the insulation from sunlight and weather: Exposure to sunlight and weather can also affect the insulation’s performance. Therefore, it’s important to cover the insulation with a tarpaulin or plastic sheeting to protect it from the elements.

Avoid stacking heavy objects on top of the insulation: 125mm Knauf Dritherm Ultimate Cavity Slab 32 is designed to be resilient and durable. However, stacking heavy objects on top of the insulation can cause it to compress, affecting its performance.

Store the insulation in its original packaging: Knauf Dritherm Cavity Slab 32 (125mm) is typically supplied in polythene packaging that protects it during transit and storage. It’s important to keep the insulation in its original packaging until it’s ready to be installed to ensure that it stays clean and protected.

What is Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 – 125mm is a high-performance insulation product designed for use in external masonry cavity walls. It is made from mineral wool and has excellent thermal and acoustic insulation properties.

How do I install Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 should be installed between the two leaves of a cavity wall, ensuring a tight fit to prevent air gaps. It can be friction fitted or mechanically fixed using wire or plastic retaining clips.

What are the benefits of using Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 provides excellent thermal and acoustic insulation, helping to reduce energy costs and noise pollution. It is also fire resistant and water repellent, making it a safe and durable choice for cavity wall insulation.

Is it environmentally friendly?

It is made from recycled materials and is fully recyclable at the end of its life. It also has a low embodied energy, meaning that it requires less energy to manufacture and transport than many other insulation products.

Is it suitable for use in all types of buildings?

Knauf Dritherm Ultimate Cavity Slab 32 (125mm) is suitable for use in most types of buildings, including residential, commercial, and industrial properties. However, it may not be suitable for use in buildings with unusual or complex wall constructions, so it is always best to consult with a qualified installer.

The post Knauf Dritherm Ultimate Cavity Slab 32 125mm (1200mm x 455mm) – 2.18m2 pack appeared first on Trade Insulations.

100mm Dritherm Slab 32 is a high-performance insulation solution for residential and commercial buildings. It is designed to provide excellent thermal and acoustic insulation for cavity walls.

This product is made of highly resilient and non-combustible mineral wool material. The wool is manufactured from a blend of naturally occurring rock and recycled glass, which makes it an environmentally friendly choice. 100mm Dritherm 32 is designed for use in cavity walls.

The Benefits of using Knauf 100mm Dritherm 32

One of the key benefits of this product is its excellent thermal performance. It has a thermal conductivity of 0.032 W/mK, which means it can provide high levels of insulation and help reduce energy consumption. This makes it ideal for use in both new and existing buildings that require insulation upgrades.

Another benefit of Knauf Dritherm 100mm Cavity Slab 32 is its acoustic performance. It has a high-density structure that can effectively absorb sound waves and reduce noise transmission. This makes it an excellent choice for buildings located in noisy areas or those that require a quiet environment, such as hospitals or schools.

This product is also easy to install. It comes in pre-cut sizes that fit perfectly into standard cavity walls. The slabs are designed to be friction-fitted, which means they can be easily pushed into place without the need for any adhesive or mechanical fasteners. This makes installation quick and hassle-free, saving time and reducing labour costs.

Knauf Dritherm 32 100mm is a safe and durable insulation solution. It is non-combustible, which means it does not contribute to the spread of fire. It is also resistant to moisture, which means it will not sag or slump over time. This ensures that it maintains its thermal and acoustic performance for the lifetime of the building.

In addition, Knauf 100mm Dritherm 32 is environmentally friendly. The product is manufactured using sustainable materials and has a low environmental impact. It is also recyclable, which means it can be reused at the end of its life cycle.

Installing 100mm Knauf Dritherm Cavity Slab 32

Installing 100mm Knauf Dritherm Ultimate Cavity Slab 32 is a straightforward process that can be carried out by a competent DIY enthusiast or a professional contractor. Here are the general steps involved:

• Preparation: Before installing the insulation, it’s essential to ensure that the cavity wall is clean and free from any debris or protrusions that could affect the insulation’s performance. Any existing insulation should be removed to make way for the new installation.
• Cutting the insulation: Knauf Dritherm Ultimate Cavity Slab 32 – 100mm comes in pre-cut sizes that fit standard cavity walls. However, if necessary, the insulation can be cut using a sharp knife or saw to fit any irregular spaces.
• Installing the insulation: The insulation is designed to be friction-fitted into the cavity wall. Start by placing the insulation at the bottom of the cavity, ensuring that it fits snugly. Then work your way up, filling the cavity with insulation until it is completely filled. Ensure that the insulation is flush with the surface of the inner leaf.
• Finishing: Once the insulation is installed, it’s important to ensure that the cavity is sealed to prevent any air leakage. Seal any gaps or holes with a suitable sealant or tape. Finally, replace any removed skirting boards or architraves.

It’s worth noting that proper safety precautions should be taken when handling insulation, including wearing protective clothing, gloves, and goggles. If you’re not confident in carrying out the installation yourself, it’s best to hire a professional contractor to ensure that the insulation is installed correctly and safely.

Correctly storing 100mm Dritherm 32

Proper storage of Knauf Dritherm Ultimate Cavity Slab 32 (100mm) is essential to maintain its quality and performance. Here are some tips on how to store the insulation correctly:

Store the insulation in a dry and secure location: Moisture can affect the insulation’s performance and cause it to sag or slump over time. Therefore, it’s important to store the insulation in a dry location away from any potential sources of moisture. The storage area should also be secure to prevent any damage or theft.

Keep the insulation off the ground: To avoid any potential moisture damage, store the insulation off the ground on pallets or racks. This will also make it easier to access and transport the insulation when needed.

Protect the insulation from sunlight and weather: Exposure to sunlight and weather can also affect the insulation’s performance. Therefore, it’s important to cover the insulation with a tarpaulin or plastic sheeting to protect it from the elements.

Avoid stacking heavy objects on top of the insulation: 100mm Knauf Dritherm Ultimate Cavity Slab 32 is designed to be resilient and durable. However, stacking heavy objects on top of the insulation can cause it to compress, affecting its performance.

Store the insulation in its original packaging: Knauf Dritherm Cavity Slab 32 (100mm) is typically supplied in polythene packaging that protects it during transit and storage. It’s important to keep the insulation in its original packaging until it’s ready to be installed to ensure that it stays clean and protected.

What is Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 – 100mm is a high-performance insulation product designed for use in external masonry cavity walls. It is made from mineral wool and has excellent thermal and acoustic insulation properties.

How do I install Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 should be installed between the two leaves of a cavity wall, ensuring a tight fit to prevent air gaps. It can be friction fitted or mechanically fixed using wire or plastic retaining clips.

What are the benefits of using Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 provides excellent thermal and acoustic insulation, helping to reduce energy costs and noise pollution. It is also fire resistant and water repellent, making it a safe and durable choice for cavity wall insulation.

Is it environmentally friendly?

It is made from recycled materials and is fully recyclable at the end of its life. It also has a low embodied energy, meaning that it requires less energy to manufacture and transport than many other insulation products.

Is it suitable for use in all types of buildings?

Knauf Dritherm Ultimate Cavity Slab 32 (100mm) is suitable for use in most types of buildings, including residential, commercial, and industrial properties. However, it may not be suitable for use in buildings with unusual or complex wall constructions, so it is always best to consult with a qualified installer.

The post Knauf Dritherm 32 100mm Ultimate Cavity Slab (1200mm x 455mm) – 3.27m2 pack appeared first on Trade Insulations.

85mm Dritherm Slab 32 is a high-performance insulation solution for residential and commercial buildings. It is designed to provide excellent thermal and acoustic insulation for cavity walls.

This product is made of highly resilient and non-combustible mineral wool material. The wool is manufactured from a blend of naturally occurring rock and recycled glass, which makes it an environmentally friendly choice. 85mm Dritherm 32 is designed for use in cavity walls.

The Benefits of using Knauf 85mm Dritherm 32

One of the key benefits of this product is its excellent thermal performance. It has a thermal conductivity of 0.032 W/mK, which means it can provide high levels of insulation and help reduce energy consumption. This makes it ideal for use in both new and existing buildings that require insulation upgrades.

Another benefit of Knauf Dritherm 85mm Cavity Slab 32 is its acoustic performance. It has a high-density structure that can effectively absorb sound waves and reduce noise transmission. This makes it an excellent choice for buildings located in noisy areas or those that require a quiet environment, such as hospitals or schools.

This product is also easy to install. It comes in pre-cut sizes that fit perfectly into standard cavity walls. The slabs are designed to be friction-fitted, which means they can be easily pushed into place without the need for any adhesive or mechanical fasteners. This makes installation quick and hassle-free, saving time and reducing labour costs.

Knauf Dritherm 32 85mm is a safe and durable insulation solution. It is non-combustible, which means it does not contribute to the spread of fire. It is also resistant to moisture, which means it will not sag or slump over time. This ensures that it maintains its thermal and acoustic performance for the lifetime of the building.

In addition, Knauf 85mm Dritherm 32 is environmentally friendly. The product is manufactured using sustainable materials and has a low environmental impact. It is also recyclable, which means it can be reused at the end of its life cycle.

Installing 85mm Knauf Dritherm Cavity Slab 32

Installing 85mm Knauf Dritherm Ultimate Cavity Slab 32 is a straightforward process that can be carried out by a competent DIY enthusiast or a professional contractor. Here are the general steps involved:

• Preparation: Before installing the insulation, it’s essential to ensure that the cavity wall is clean and free from any debris or protrusions that could affect the insulation’s performance. Any existing insulation should be removed to make way for the new installation.
• Cutting the insulation: Knauf Dritherm Ultimate Cavity Slab 32 – 85mm comes in pre-cut sizes that fit standard cavity walls. However, if necessary, the insulation can be cut using a sharp knife or saw to fit any irregular spaces.
• Installing the insulation: The insulation is designed to be friction-fitted into the cavity wall. Start by placing the insulation at the bottom of the cavity, ensuring that it fits snugly. Then work your way up, filling the cavity with insulation until it is completely filled. Ensure that the insulation is flush with the surface of the inner leaf.
• Finishing: Once the insulation is installed, it’s important to ensure that the cavity is sealed to prevent any air leakage. Seal any gaps or holes with a suitable sealant or tape. Finally, replace any removed skirting boards or architraves.

It’s worth noting that proper safety precautions should be taken when handling insulation, including wearing protective clothing, gloves, and goggles. If you’re not confident in carrying out the installation yourself, it’s best to hire a professional contractor to ensure that the insulation is installed correctly and safely.

Correctly storing 85mm Dritherm 32

Proper storage of Knauf Dritherm Ultimate Cavity Slab 32 (85mm) is essential to maintain its quality and performance. Here are some tips on how to store the insulation correctly:

Store the insulation in a dry and secure location: Moisture can affect the insulation’s performance and cause it to sag or slump over time. Therefore, it’s important to store the insulation in a dry location away from any potential sources of moisture. The storage area should also be secure to prevent any damage or theft.

Keep the insulation off the ground: To avoid any potential moisture damage, store the insulation off the ground on pallets or racks. This will also make it easier to access and transport the insulation when needed.

Protect the insulation from sunlight and weather: Exposure to sunlight and weather can also affect the insulation’s performance. Therefore, it’s important to cover the insulation with a tarpaulin or plastic sheeting to protect it from the elements.

Avoid stacking heavy objects on top of the insulation: 85mm Knauf Dritherm Ultimate Cavity Slab 32 is designed to be resilient and durable. However, stacking heavy objects on top of the insulation can cause it to compress, affecting its performance.

Store the insulation in its original packaging: Knauf Dritherm Cavity Slab 32 (85mm) is typically supplied in polythene packaging that protects it during transit and storage. It’s important to keep the insulation in its original packaging until it’s ready to be installed to ensure that it stays clean and protected.

What is Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 – 85mm is a high-performance insulation product designed for use in external masonry cavity walls. It is made from mineral wool and has excellent thermal and acoustic insulation properties.

How do I install Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 should be installed between the two leaves of a cavity wall, ensuring a tight fit to prevent air gaps. It can be friction fitted or mechanically fixed using wire or plastic retaining clips.

What are the benefits of using Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 provides excellent thermal and acoustic insulation, helping to reduce energy costs and noise pollution. It is also fire resistant and water repellent, making it a safe and durable choice for cavity wall insulation.

Is it environmentally friendly?

It is made from recycled materials and is fully recyclable at the end of its life. It also has a low embodied energy, meaning that it requires less energy to manufacture and transport than many other insulation products.

Is it suitable for use in all types of buildings?

Knauf Dritherm Ultimate Cavity Slab 32 (85mm) is suitable for use in most types of buildings, including residential, commercial, and industrial properties. However, it may not be suitable for use in buildings with unusual or complex wall constructions, so it is always best to consult with a qualified installer.

The post Knauf Dritherm Ultimate Cavity Slab 32 – 85mm Dritherm 32 (1200mm x 455mm) – 122.85m2 pallet appeared first on Trade Insulations.

75mm Dritherm Slab 32 is a high-performance insulation solution for residential and commercial buildings. It is designed to provide excellent thermal and acoustic insulation for cavity walls.

This product is made of highly resilient and non-combustible mineral wool material. The wool is manufactured from a blend of naturally occurring rock and recycled glass, which makes it an environmentally friendly choice. 75mm Dritherm 32 is designed for use in cavity walls.

The Benefits of using Knauf 75mm Dritherm 32

One of the key benefits of this product is its excellent thermal performance. It has a thermal conductivity of 0.032 W/mK, which means it can provide high levels of insulation and help reduce energy consumption. This makes it ideal for use in both new and existing buildings that require insulation upgrades.

Another benefit of Knauf Dritherm 75mm Cavity Slab 32 is its acoustic performance. It has a high-density structure that can effectively absorb sound waves and reduce noise transmission. This makes it an excellent choice for buildings located in noisy areas or those that require a quiet environment, such as hospitals or schools.

This product is also easy to install. It comes in pre-cut sizes that fit perfectly into standard cavity walls. The slabs are designed to be friction-fitted, which means they can be easily pushed into place without the need for any adhesive or mechanical fasteners. This makes installation quick and hassle-free, saving time and reducing labour costs.

Knauf Dritherm 32 75mm is a safe and durable insulation solution. It is non-combustible, which means it does not contribute to the spread of fire. It is also resistant to moisture, which means it will not sag or slump over time. This ensures that it maintains its thermal and acoustic performance for the lifetime of the building.

In addition, Knauf 75mm Dritherm 32 is environmentally friendly. The product is manufactured using sustainable materials and has a low environmental impact. It is also recyclable, which means it can be reused at the end of its life cycle.

Installing 75mm Knauf Dritherm Cavity Slab 32

Installing 75mm Knauf Dritherm Ultimate Cavity Slab 32 is a straightforward process that can be carried out by a competent DIY enthusiast or a professional contractor. Here are the general steps involved:

• Preparation: Before installing the insulation, it’s essential to ensure that the cavity wall is clean and free from any debris or protrusions that could affect the insulation’s performance. Any existing insulation should be removed to make way for the new installation.
• Cutting the insulation: Knauf Dritherm Ultimate Cavity Slab 32 – 75mm comes in pre-cut sizes that fit standard cavity walls. However, if necessary, the insulation can be cut using a sharp knife or saw to fit any irregular spaces.
• Installing the insulation: The insulation is designed to be friction-fitted into the cavity wall. Start by placing the insulation at the bottom of the cavity, ensuring that it fits snugly. Then work your way up, filling the cavity with insulation until it is completely filled. Ensure that the insulation is flush with the surface of the inner leaf.
• Finishing: Once the insulation is installed, it’s important to ensure that the cavity is sealed to prevent any air leakage. Seal any gaps or holes with a suitable sealant or tape. Finally, replace any removed skirting boards or architraves.

It’s worth noting that proper safety precautions should be taken when handling insulation, including wearing protective clothing, gloves, and goggles. If you’re not confident in carrying out the installation yourself, it’s best to hire a professional contractor to ensure that the insulation is installed correctly and safely.

Correctly storing 75mm Dritherm 32

Proper storage of Knauf Dritherm Ultimate Cavity Slab 32 (75mm) is essential to maintain its quality and performance. Here are some tips on how to store the insulation correctly:

Store the insulation in a dry and secure location: Moisture can affect the insulation’s performance and cause it to sag or slump over time. Therefore, it’s important to store the insulation in a dry location away from any potential sources of moisture. The storage area should also be secure to prevent any damage or theft.

Keep the insulation off the ground: To avoid any potential moisture damage, store the insulation off the ground on pallets or racks. This will also make it easier to access and transport the insulation when needed.

Protect the insulation from sunlight and weather: Exposure to sunlight and weather can also affect the insulation’s performance. Therefore, it’s important to cover the insulation with a tarpaulin or plastic sheeting to protect it from the elements.

Avoid stacking heavy objects on top of the insulation: 75mm Knauf Dritherm Ultimate Cavity Slab 32 is designed to be resilient and durable. However, stacking heavy objects on top of the insulation can cause it to compress, affecting its performance.

Store the insulation in its original packaging: Knauf Dritherm Cavity Slab 32 (75mm) is typically supplied in polythene packaging that protects it during transit and storage. It’s important to keep the insulation in its original packaging until it’s ready to be installed to ensure that it stays clean and protected.

What is Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 – 75mm is a high-performance insulation product designed for use in external masonry cavity walls. It is made from mineral wool and has excellent thermal and acoustic insulation properties.

How do I install Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 should be installed between the two leaves of a cavity wall, ensuring a tight fit to prevent air gaps. It can be friction fitted or mechanically fixed using wire or plastic retaining clips.

What are the benefits of using Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 provides excellent thermal and acoustic insulation, helping to reduce energy costs and noise pollution. It is also fire resistant and water repellent, making it a safe and durable choice for cavity wall insulation.

Is it environmentally friendly?

It is made from recycled materials and is fully recyclable at the end of its life. It also has a low embodied energy, meaning that it requires less energy to manufacture and transport than many other insulation products.

Is it suitable for use in all types of buildings?

Knauf Dritherm Ultimate Cavity Slab 32 (75mm) is suitable for use in most types of buildings, including residential, commercial, and industrial properties. However, it may not be suitable for use in buildings with unusual or complex wall constructions, so it is always best to consult with a qualified installer.

The post Knauf Dritherm Ultimate Cavity Slab 32 – 75mm Dritherm 32 (1200mm x 455mm) – 114.8m2 Pallet appeared first on Trade Insulations.

150mm Dritherm Slab 32 is a high-performance insulation solution for residential and commercial buildings. It is designed to provide excellent thermal and acoustic insulation for cavity walls.

This product is made of highly resilient and non-combustible mineral wool material. The wool is manufactured from a blend of naturally occurring rock and recycled glass, which makes it an environmentally friendly choice. 150mm Dritherm 32 is designed for use in cavity walls.

The Benefits of using Knauf 150mm Dritherm 32

One of the key benefits of this product is its excellent thermal performance. It has a thermal conductivity of 0.032 W/mK, which means it can provide high levels of insulation and help reduce energy consumption. This makes it ideal for use in both new and existing buildings that require insulation upgrades.

Another benefit of Knauf Dritherm 150mm Cavity Slab 32 is its acoustic performance. It has a high-density structure that can effectively absorb sound waves and reduce noise transmission. This makes it an excellent choice for buildings located in noisy areas or those that require a quiet environment, such as hospitals or schools.

This product is also easy to install. It comes in pre-cut sizes that fit perfectly into standard cavity walls. The slabs are designed to be friction-fitted, which means they can be easily pushed into place without the need for any adhesive or mechanical fasteners. This makes installation quick and hassle-free, saving time and reducing labour costs.

Knauf Dritherm 32 150mm is a safe and durable insulation solution. It is non-combustible, which means it does not contribute to the spread of fire. It is also resistant to moisture, which means it will not sag or slump over time. This ensures that it maintains its thermal and acoustic performance for the lifetime of the building.

In addition, Knauf 150mm Dritherm 32 is environmentally friendly. The product is manufactured using sustainable materials and has a low environmental impact. It is also recyclable, which means it can be reused at the end of its life cycle.

Installing 150mm Knauf Dritherm Cavity Slab 32

Installing 150mm Knauf Dritherm Ultimate Cavity Slab 32 is a straightforward process that can be carried out by a competent DIY enthusiast or a professional contractor. Here are the general steps involved:

• Preparation: Before installing the insulation, it’s essential to ensure that the cavity wall is clean and free from any debris or protrusions that could affect the insulation’s performance. Any existing insulation should be removed to make way for the new installation.
• Cutting the insulation: Knauf Dritherm Ultimate Cavity Slab 32 – 150mm comes in pre-cut sizes that fit standard cavity walls. However, if necessary, the insulation can be cut using a sharp knife or saw to fit any irregular spaces.
• Installing the insulation: The insulation is designed to be friction-fitted into the cavity wall. Start by placing the insulation at the bottom of the cavity, ensuring that it fits snugly. Then work your way up, filling the cavity with insulation until it is completely filled. Ensure that the insulation is flush with the surface of the inner leaf.
• Finishing: Once the insulation is installed, it’s important to ensure that the cavity is sealed to prevent any air leakage. Seal any gaps or holes with a suitable sealant or tape. Finally, replace any removed skirting boards or architraves.

It’s worth noting that proper safety precautions should be taken when handling insulation, including wearing protective clothing, gloves, and goggles. If you’re not confident in carrying out the installation yourself, it’s best to hire a professional contractor to ensure that the insulation is installed correctly and safely.

Correctly storing 150mm Dritherm 32

Proper storage of Knauf Dritherm Ultimate Cavity Slab 32 (150mm) is essential to maintain its quality and performance. Here are some tips on how to store the insulation correctly:

Store the insulation in a dry and secure location: Moisture can affect the insulation’s performance and cause it to sag or slump over time. Therefore, it’s important to store the insulation in a dry location away from any potential sources of moisture. The storage area should also be secure to prevent any damage or theft.

Keep the insulation off the ground: To avoid any potential moisture damage, store the insulation off the ground on pallets or racks. This will also make it easier to access and transport the insulation when needed.

Protect the insulation from sunlight and weather: Exposure to sunlight and weather can also affect the insulation’s performance. Therefore, it’s important to cover the insulation with a tarpaulin or plastic sheeting to protect it from the elements.

Avoid stacking heavy objects on top of the insulation: 150mm Knauf Dritherm Ultimate Cavity Slab 32 is designed to be resilient and durable. However, stacking heavy objects on top of the insulation can cause it to compress, affecting its performance.

Store the insulation in its original packaging: Knauf Dritherm Cavity Slab 32 (150mm) is typically supplied in polythene packaging that protects it during transit and storage. It’s important to keep the insulation in its original packaging until it’s ready to be installed to ensure that it stays clean and protected.

What is Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 – 150mm is a high-performance insulation product designed for use in external masonry cavity walls. It is made from mineral wool and has excellent thermal and acoustic insulation properties.

How do I install Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 should be installed between the two leaves of a cavity wall, ensuring a tight fit to prevent air gaps. It can be friction fitted or mechanically fixed using wire or plastic retaining clips.

What are the benefits of using Knauf Dritherm Ultimate Cavity Slab 32?

Knauf Dritherm Ultimate Cavity Slab 32 provides excellent thermal and acoustic insulation, helping to reduce energy costs and noise pollution. It is also fire resistant and water repellent, making it a safe and durable choice for cavity wall insulation.

Is it environmentally friendly?

It is made from recycled materials and is fully recyclable at the end of its life. It also has a low embodied energy, meaning that it requires less energy to manufacture and transport than many other insulation products.

Is it suitable for use in all types of buildings?

Knauf Dritherm Ultimate Cavity Slab 32 (150mm) is suitable for use in most types of buildings, including residential, commercial, and industrial properties. However, it may not be suitable for use in buildings with unusual or complex wall constructions, so it is always best to consult with a qualified installer.

The post Knauf Dritherm Ultimate Cavity Slab 32 150mm (1200mm x 455mm) – 2.18m2 pack appeared first on Trade Insulations.

Knauf Dritherm 37 125mm – a high-quality insulation material made of glass mineral wool. The slabs are light and as a result, DriTherm products are easy to cut and handle and install. 125mm Dritherm 37 is reliable and durable because of its great lifespan that does not degrade with time. As well as the 125mm, the Dritherm 37 range offers 50mm, 65mm, 75mm, 85mm, 100mm, 150mm.
125mm Dritherm 37 Slab Insulation is a popular choice of thickness due to its high thermal resistance, meaning less heat transferring though the slab. Dritherm Cavity Slabs are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.

125mm DriTherm 37 key features:

• 1200mm x 455mm
• 125mm thickness
• Density – 17kg/m3
• Thermal conductivity of 0.037W/mK
• Water repellent – therefore will not absorb water
• No maintenance required
• Glass mineral wool
• Water Vapour Resistivity: 5.00MNs/g.m
• Free from harmful gases including CFC and HCFC
• Zero Ozone Depletion Potential (ODP) as well as Low Global Warming Potential (GWP)

DriTherm 37 125mm can be installed in residential and commercial buildings including new builds and extensions. DriTherm 37 is designed for masonry cavity external walls for full fill applications.
Cut DriTherm 125mm using a sharp knife. Install DriTherm 37 in between the inner leaf and outer leaf of the building as construction takes place. The slabs are designed to fit between wall ties. Consult a professional before insulating your property.

125mm Dritherm 37 Specifications

125mm Knauf Dritherm 37 holds great thermal qualities and will keep heat inside the property. In addition, this will reduce energy bills up to 30%. This means cooler summers and hotter winters within an energy efficient property because of the level of internal climate.
Knauf Dritherm 37 has a great fire rating and is non-combustible. As a result, it gives no contribution to the spread of fire. The Dritherm slab will not ignite due to flame exposure.
Glass and Rock Mineral Wool are easier to install correctly than other insulants such as rigid boards. This is because they adapt to any slight imperfections in the substrate and knit together. This eliminates any air gaps. Evidence shows the absence of air gaps is crucial to achieving real performance in the relevant application.

Certifications:

• A1 Euroclass Reaction to Fire classification
• BS EN 13162, ISO 50001 Energy Management Systems
• OHSAS 18001 Occupational Health and Safety Management Systems
• ISO 14001 Environmental Management Systems
• ISO 9001 Quality Management Systems, as certified by Bureau Veritas.

The post Knauf Dritherm Standard Cavity Slab 37 125mm (1200mm x 455mm) – 3.28m2 appeared first on Trade Insulations.

Knauf DriTherm 37 100mm – an insulation material made from Glass mineral wool. Glass mineral wool, is a type of mineral wool insulation that has been made from raw glass materials. These materials are heated until they melt and then spun to form a wool-like fibre. Furthermore, the manufacturing process of Knauf Dritherm 37 is sustainable and uses organic materials.
100mm Knauf Dritherm 37 has two main properties – Thermal and Fire.

Thermal – 100mm Dritherm 37 has a thermal conductivity of just 0.037W/mK. Thermal conductivity means less heat will pass through the insulation slabs, keeping internal temperatures level. The thermal properties of the Dritherm 100mm will also prevent heat/energy from escaping the building and save money on energy bills. Less energy escaping will also create a more energy-efficient property.

Fire – Knauf is non-combustible and gives no contribution to the spread of fire. The Dritherm slab will not ignite due to flame exposure. Dritherm 37 has a melting point of over 1000ºc. The 100mm Dritherm gives more time for people to leave the building and prevent damage to the building structure.

Dritherm 37 100mm is the most used thickness when it comes to cavity wall insulation materials, and it is easy to handle and install. The most common cavity size is 90mm to 100mm. Moreso, the Dritherm 37 100mm is a great option should you need to double up on insulation to achieve an unusual thickness.

Key Features Of Knauf Dritherm 37

• Lightweight and easy to cut, handle, and install
• Best possible fire performance
• Great thermal qualities
• More temperature-controlled internal climate
• Long lasting lifespan
• Durable and reliable
• Water repellent
• Low density
• Free from harmful gases (CFC and HCFC)
• They do not add to the formation of any gases with Ozone Depletion Potential (ODP) or Global Warming Potential (GWP)

100mm Dritherm 37 Slab Insulation is 1200mm x 455mm with a density of 17kg/m3.
Knauf slabs are soft to touch and can be cut using a saw or a sharp knife. These tools can sometimes leave a messy edge. Cut the slabs to size with a bit extra length.

DriTherm 37 100mm Application

Dritherm 100mm slabs – designed for full-fill, external masonry cavity wall applications. The Glass mineral wool slabs are formed into a rectangular shape, designed for easy installation within the building’s external walls. These slab dimensions fit easily between wall ties because of their size. The 100mm Dritherm 37 shape and size means there’s little cutting required.
The 100mm slabs are designed for commercial, residential, and industrial buildings. In addition, Dritherm 37 can help to meet building regulations.
The slabs are extremely durable and last lasting. The 100mm DriTherm 37 will last for as long as the building does, and product performance will not reduce over time. Knauf glass mineral wool slabs are a well-used product within the construction industry. Unlike PIR Insulation boards, Dritherm is smaller and size with little need to cut the product and the slabs are flexible. The flexible slabs are easy to manipulate into most cavity spaces. Glass mineral wool also comes in tightly compressed packaging which is easy to manoeuvre around and store on a construction site.
Always consult a building/construction professional before insulating your property. This can be a costly and time-effective mistake. Ensure the walls are free from condensation and mould before insulating. Please note, this is a guide only.

How To Install Dritherm 37 Slabs

Step 1:
Firstly, Install wall ties in the inner leaf at 600mm horizontal centres
For suspended timber floors, wall ties start a minimum of 200mm below the top surface of the ground floor perimeter insulation upstand. Place the wall ties 900mm apart.
Continue constructing the inner leaf up to the next wall tie course. (450mm above the previous inner leaf). Position the next course of wall ties at regular horizontal centres. After that, place extra wall ties at jambs for all openings. Install the next course of blockwork to secure the ties.
After raising each section of the inner leaf and before installing the insulation board, excess mortar should be removed, and mortar droppings cleaned from exposed edges of the installed insulation boards.

Step 2:
Secondly, the first row of insulation slabs should now be installed between the two rows of wall ties (fleece must face outwards to cavity). Install each insulation slab tight against the inner leaf with joints tightly butted.
Next, secure each slab at a minimum of three points. Add Additional ties to satisfy structural requirements or to ensure adequate retention of the boards or cut pieces.

Step 3:
Thirdly, apply a self-adhesive breathable tape to all horizontal and vertical joints, board edges and abutting junction interfaces. (no less than 100mm wide and no less than 50mm either side of any edge. Additional layers may be applied.)
These surfaces should be clean, dry and free from grease, dust, and dirt prior to application. After that, build the outer leaf to the level of the top of the boards and repeat the process. (Cavity of 10mm or less).
To complete, if finishing at a gable, continue 200mm beyond the height of the toper storey ceiling and a cavity tray installed above the insulation.

Dritherm 37 Certifications

• A1 Euroclass Reaction to Fire classification
• BS EN 13162, ISO 50001 Energy Management Systems
• OHSAS 18001 Occupational Health and Safety Management Systems
• ISO 14001 Environmental Management Systems
• ISO 9001 Quality Management Systems

The post Knauf Dritherm 37 100mm Standard Cavity Slab (1200mm x 455mm) – 6.55m2 appeared first on Trade Insulations.

Knauf DriTherm 37 85mm – an insulation material made from Glass mineral wool. Glass mineral wool, a type of mineral wool insulation that has been made from raw glass materials. These materials are heated until they melt and then spun to form a wool like fibre. Furthermore, the manufacturing process of Knauf Dritherm 37 is sustainable and uses organic materials.
85mm Knauf Dritherm 37 has two main properties – Thermal and Fire.

Thermal – 85mm Dritherm 37 has a thermal conductivity of just 0.037W/mK. The thermal conductivity means less heat will pass through the insulation slabs, keeping internal temperatures level. The thermal properties of the Dritherm 85mm will also prevent heat / energy escaping the building and save money on energy bills. Less energy escaping will also create a more energy efficient property.

Fire – Knauf is non-combustible and gives no contribution to the spread of fire. The Dritherm slab will not ignite due to flame exposure. Dritherm 37 has a melting point of over 1000ºc. The 85mm Dritherm gives more time for people to leave the building and prevent damage to the building structure.

Dritherm 37 85mm is the most used thickness when it comes to cavity wall insulation materials, and it is easy to handle and install.

Key Features Of 85mm Knauf Dritherm 37

• Lightweight and easy to cut, handle, and install
• Best possible fire performance
• Great thermal qualities
• More temperature controlled internal climate
• Long lasting lifespan
• Durable and reliable
• Water repellent
• Low density
• Free from harmful gases (CFC and HCFC)
• They do not add to the formation of any gases with Ozone Depletion Potential (ODP) or Global Warming Potential (GWP)

85mm Dritherm 37 Slab Insulation is 1200mm x 455mm with a density of 17kg/m3.
Knauf slabs are soft to touch and can be cut using a saw or a sharp knife. These tools can sometimes leave a messy edge. Cut the slabs to size with a bit extra in length.

85mm DriTherm 37 Application

Dritherm 85mm slabs – designed for full fill, external masonry cavity wall applications. The Glass mineral wool slabs are formed into a rectangular shape, designed for easy installation within the building’s external walls. These slab dimensions fit easily between wall ties because of their size. The 85mm Dritherm 37 shape and size means there’s little cutting required.
The 85mm slabs are designed for commercial, residential, and industrial buildings. In addition, Dritherm 37 can help to meet building regulations.
The slabs are extremely durable and last lasting. The 85mm DriTherm 37 will last for as long as the building does, and product performance will not reduce over time. Knauf glass mineral wool slabs are a well-used product within the construction industry. Unlike PIR Insulation boards, Dritherm is smaller and size with little need to cut the product and the slabs are flexible. The flexible slabs are easy to manipulate into most cavity spaces. Glass mineral wool also comes in tightly compressed packaging which is easy to manoeuvre around and store on a construction site.
Always consult a building / construction professional before insulation your property. This can be a costly and time effective mistake. Ensure the walls are free from condensation and mould before insulating. Please note, this is a guide only.

How To Install Dritherm 37 85mm Slabs

Step 1:
Firstly, Install wall ties in the inner leaf at 600mm horizontal centres
For suspended timber floors, wall ties start a minimum of 200mm below the top surface of the ground floor perimeter insulation upstand. Place the wall ties 900mm apart.
Continue constructing the inner leaf up to the next wall tie course. (450mm above the previous inner leaf). Position the next course of wall ties at regular horizontal centres. After that, place extra wall ties at jambs for all openings. Install the next course of blockwork to secure the ties.
After raising each section of the inner leaf and before installing the insulation board, excess mortar should be removed, and mortar droppings cleaned from exposed edges of the installed insulation boards.

Step 2:
Secondly, the first row of insulation slabs should now be installed between the two rows of wall ties (fleece must face outwards to cavity). Install each insulation slab tight against the inner leaf with joints tightly butted.
Next, secure each slab at a minimum of three points. Add Additional ties to satisfy structural requirements or to ensure adequate retention of the boards or cut pieces.

Step 3:
Thirdly, apply a self-adhesive breathable tape to all horizontal and vertical joints, board edges and abutting junction interfaces. (no less than 100mm wide and no less than 50mm either side of any edge. Additional layers may be applied.)
These surfaces should be clean, dry and free from grease, dust, and dirt prior to application. After that, build the outer leaf to the level of the top of the boards and repeat the process. (Cavity of 10mm or less).
To complete, if finishing at a gable, continue 200mm beyond the height of the toper storey ceiling and a cavity tray installed above the insulation.

85mm Dritherm 37 Certifications

• A1 Euroclass Reaction to Fire classification
• BS EN 13162, ISO 50001 Energy Management Systems
• OHSAS 18001 Occupational Health and Safety Management Systems
• ISO 14001 Environmental Management Systems
• ISO 9001 Quality Management Systems

The post Knauf Dritherm Standard Cavity Slab 37 85mm (1200mm x 455mm) – 196.56m2 pallet appeared first on Trade Insulations.

Knauf DriTherm 37 75mm – an insulation material made from Glass mineral wool. Glass mineral wool, a type of mineral wool insulation that has been made from raw glass materials. These materials are heated until they melt and then spun to form a wool like fibre. Furthermore, the manufacturing process of Knauf Dritherm 37 is sustainable and uses organic materials.
75mm Knauf Dritherm 37 has two main properties – Thermal and Fire.

Thermal – 75mm Dritherm 37 has a thermal conductivity of just 0.037W/mK. The thermal conductivity means less heat will pass through the insulation slabs, keeping internal temperatures level. The thermal properties of the Dritherm 75mm will also prevent heat / energy escaping the building and save money on energy bills. Less energy escaping will also create a more energy efficient property.

Fire – Knauf is non-combustible and gives no contribution to the spread of fire. The Dritherm slab will not ignite due to flame exposure. Dritherm 37 has a melting point of over 1000ºc. The 75mm Dritherm gives more time for people to leave the building and prevent damage to the building structure.

Dritherm 37 75mm is the most used thickness when it comes to cavity wall insulation materials, and it is easy to handle and install.

Key Features Of 75mm Knauf Dritherm 37

• Lightweight and easy to cut, handle, and install
• Best possible fire performance
• Great thermal qualities
• More temperature controlled internal climate
• Long lasting lifespan
• Durable and reliable
• Water repellent
• Low density
• Free from harmful gases (CFC and HCFC)
• They do not add to the formation of any gases with Ozone Depletion Potential (ODP) or Global Warming Potential (GWP)

75mm Dritherm 37 Slab Insulation is 1200mm x 455mm with a density of 17kg/m3.
Knauf slabs are soft to touch and can be cut using a saw or a sharp knife. These tools can sometimes leave a messy edge. Cut the slabs to size with a bit extra in length.

75mm DriTherm 37 Application

Dritherm 75mm slabs – designed for full fill, external masonry cavity wall applications. The Glass mineral wool slabs are formed into a rectangular shape, designed for easy installation within the building’s external walls. These slab dimensions fit easily between wall ties because of their size. The 75mm Dritherm 37 shape and size means there’s little cutting required.
The 75mm slabs are designed for commercial, residential, and industrial buildings. In addition, Dritherm 37 can help to meet building regulations.
The slabs are extremely durable and last lasting. The 75mm DriTherm 37 will last for as long as the building does, and product performance will not reduce over time. Knauf glass mineral wool slabs are a well-used product within the construction industry. Unlike PIR Insulation boards, Dritherm is smaller and size with little need to cut the product and the slabs are flexible. The flexible slabs are easy to manipulate into most cavity spaces. Glass mineral wool also comes in tightly compressed packaging which is easy to manoeuvre around and store on a construction site.
Always consult a building / construction professional before insulation your property. This can be a costly and time effective mistake. Ensure the walls are free from condensation and mould before insulating. Please note, this is a guide only.

How To Install Dritherm 37 75mm Slabs

Step 1:
Firstly, Install wall ties in the inner leaf at 600mm horizontal centres
For suspended timber floors, wall ties start a minimum of 200mm below the top surface of the ground floor perimeter insulation upstand. Place the wall ties 900mm apart.
Continue constructing the inner leaf up to the next wall tie course. (450mm above the previous inner leaf). Position the next course of wall ties at regular horizontal centres. After that, place extra wall ties at jambs for all openings. Install the next course of blockwork to secure the ties.
After raising each section of the inner leaf and before installing the insulation board, excess mortar should be removed, and mortar droppings cleaned from exposed edges of the installed insulation boards.

Step 2:
Secondly, the first row of insulation slabs should now be installed between the two rows of wall ties (fleece must face outwards to cavity). Install each insulation slab tight against the inner leaf with joints tightly butted.
Next, secure each slab at a minimum of three points. Add Additional ties to satisfy structural requirements or to ensure adequate retention of the boards or cut pieces.

Step 3:
Thirdly, apply a self-adhesive breathable tape to all horizontal and vertical joints, board edges and abutting junction interfaces. (no less than 100mm wide and no less than 50mm either side of any edge. Additional layers may be applied.)
These surfaces should be clean, dry and free from grease, dust, and dirt prior to application. After that, build the outer leaf to the level of the top of the boards and repeat the process. (Cavity of 10mm or less).
To complete, if finishing at a gable, continue 200mm beyond the height of the toper storey ceiling and a cavity tray installed above the insulation.

75mm Dritherm 37 Certifications

• A1 Euroclass Reaction to Fire classification
• BS EN 13162, ISO 50001 Energy Management Systems
• OHSAS 18001 Occupational Health and Safety Management Systems
• ISO 14001 Environmental Management Systems
• ISO 9001 Quality Management Systems

The post Knauf Dritherm Standard Cavity Slab 37 75mm (1200mm x 455mm) – 4.37m2 appeared first on Trade Insulations.

Knauf DriTherm 37 65mm – an insulation material made from Glass mineral wool. Glass mineral wool, a type of mineral wool insulation that has been made from raw glass materials. These materials are heated until they melt and then spun to form a wool like fibre. Furthermore, the manufacturing process of Knauf Dritherm 37 is sustainable and uses organic materials.
65mm Knauf Dritherm 37 has two main properties – Thermal and Fire.

Thermal – 65mm Dritherm 37 has a thermal conductivity of just 0.037W/mK. The thermal conductivity means less heat will pass through the insulation slabs, keeping internal temperatures level. The thermal properties of the Dritherm 65mm will also prevent heat / energy escaping the building and save money on energy bills. Less energy escaping will also create a more energy efficient property.

Fire – Knauf is non-combustible and gives no contribution to the spread of fire. The Dritherm slab will not ignite due to flame exposure. Dritherm 37 has a melting point of over 1000ºc. The 65mm Dritherm gives more time for people to leave the building and prevent damage to the building structure.

Dritherm 37 65mm is the most used thickness when it comes to cavity wall insulation materials, and it is easy to handle and install.

Key Features Of 65mm Knauf Dritherm 37

• Lightweight and easy to cut, handle, and install
• Best possible fire performance
• Great thermal qualities
• More temperature controlled internal climate
• Long lasting lifespan
• Durable and reliable
• Water repellent
• Low density
• Free from harmful gases (CFC and HCFC)
• They do not add to the formation of any gases with Ozone Depletion Potential (ODP) or Global Warming Potential (GWP)

65mm Dritherm 37 Slab Insulation is 1200mm x 455mm with a density of 17kg/m3.
Knauf slabs are soft to touch and can be cut using a saw or a sharp knife. These tools can sometimes leave a messy edge. Cut the slabs to size with a bit extra in length.

65mm DriTherm 37 Application

Dritherm 65mm slabs – designed for full fill, external masonry cavity wall applications. The Glass mineral wool slabs are formed into a rectangular shape, designed for easy installation within the building’s external walls. These slab dimensions fit easily between wall ties because of their size. The 65mm Dritherm 37 shape and size means there’s little cutting required.
The 65mm slabs are designed for commercial, residential, and industrial buildings. In addition, Dritherm 37 can help to meet building regulations.
The slabs are extremely durable and last lasting. The 65mm DriTherm 37 will last for as long as the building does, and product performance will not reduce over time. Knauf glass mineral wool slabs are a well-used product within the construction industry. Unlike PIR Insulation boards, Dritherm is smaller and size with little need to cut the product and the slabs are flexible. The flexible slabs are easy to manipulate into most cavity spaces. Glass mineral wool also comes in tightly compressed packaging which is easy to manoeuvre around and store on a construction site.
Always consult a building / construction professional before insulation your property. This can be a costly and time effective mistake. Ensure the walls are free from condensation and mould before insulating. Please note, this is a guide only.

How To Install Dritherm 37 65mm Slabs

Step 1:
Firstly, Install wall ties in the inner leaf at 600mm horizontal centres
For suspended timber floors, wall ties start a minimum of 200mm below the top surface of the ground floor perimeter insulation upstand. Place the wall ties 900mm apart.
Continue constructing the inner leaf up to the next wall tie course. (450mm above the previous inner leaf). Position the next course of wall ties at regular horizontal centres. After that, place extra wall ties at jambs for all openings. Install the next course of blockwork to secure the ties.
After raising each section of the inner leaf and before installing the insulation board, excess mortar should be removed, and mortar droppings cleaned from exposed edges of the installed insulation boards.

Step 2:
Secondly, the first row of insulation slabs should now be installed between the two rows of wall ties (fleece must face outwards to cavity). Install each insulation slab tight against the inner leaf with joints tightly butted.
Next, secure each slab at a minimum of three points. Add Additional ties to satisfy structural requirements or to ensure adequate retention of the boards or cut pieces.

Step 3:
Thirdly, apply a self-adhesive breathable tape to all horizontal and vertical joints, board edges and abutting junction interfaces. (no less than 100mm wide and no less than 50mm either side of any edge. Additional layers may be applied.)
These surfaces should be clean, dry and free from grease, dust, and dirt prior to application. After that, build the outer leaf to the level of the top of the boards and repeat the process. (Cavity of 10mm or less).
To complete, if finishing at a gable, continue 200mm beyond the height of the toper storey ceiling and a cavity tray installed above the insulation.

65mm Dritherm 37 Certifications

• A1 Euroclass Reaction to Fire classification
• BS EN 13162, ISO 50001 Energy Management Systems
• OHSAS 18001 Occupational Health and Safety Management Systems
• ISO 14001 Environmental Management Systems
• ISO 9001 Quality Management Systems

The post Knauf Dritherm Standard Cavity Slab 37 65mm (1200mm x 455mm) – 218.5m2 pallet appeared first on Trade Insulations.