Kingspan TR24 is part of the Thermaroof range designed for the insulation of flat roofs, specifically those waterproofed with fixed single-ply waterproofing. This product is compatible with flat roofs waterproofed with partially bonded torch-applied multi-layer bituminous waterproofing. The Kingspan TR46 PIR board is suitable for new builds, extensions, and refurbishments. The installation technique creates a flat roof insulation solution for fast-track building programmes.

Kingspan continues to manufacture high-quality insulation materials whilst upholding its long-term commitment to sustainability.

This board is a high-quality, rigid thermoset insulation board. The core comprises fibre-free polyisocyanurate, and the board is coated with glass tissue and finished with a Thermofusible polypropylene fleece on the upper face and coated with mineralised glass tissue on the lower face. The TR26 is 2400mm by 600mm and is available in a range of thicknesses from 30mm to 150mm. The TR24 is lightweight, making delivery, handling, cutting, and installation easy.

Key features:

• Ideal for new build and refurbishment
• Composed of non–deleterious material
• Resistant to solvents, fungi & rodents
• Installation technique is ideal for fast-track building programmes
• Compressive strength at 10% compression: 150 kPa
• Resistant to the passage of water vapour
• Installation technique is suitable for fast-track building programmes
• Multiple installation methods available
• Compatible with majority of torch applied waterproofing systems
• Resistant to the passage of water vapour

Kingspan TR24 is extremely durable and long lasting. When the product is installed correctly under the proper building regulations the product should last for as long as the building does. The TR24 is resistant to the passage of water vapour and moisture resistant, presenting the ideal product to be installed in an area that invites challenges weather conditions. This board will prevent mould, damp, and condensation from developing and will not rot even if these conditions should occur. It is also resistant to solvent, fungi, and rodents.
By insulating your roof you’re prevent heat from escaping your property through the roof. By doing so, you will be contributing to a more sustainable environment by helping to tackle climate change and prevent global warming. You will also save money on your energy bills and provide a more temperature controlled and comfortable residential or commercial property. Your property will be cooler in the summer and hotter in the winter.
Kingspan TR24 can be installed in a range of methods. These methods include:

• Dense Concrete Deck with Suspended Ceiling
• Timber Deck with Plasterboard Ceiling
• Metal Deck with No Ceiling
• Flat Roof waterproofed with partially bonded torch applied multi-layer bituminous waterproofing

Certifications:

• ISO 9001: 2015 (Quality Management Systems. Requirements)
• BS EN ISO 14001: 2015 (Environmental Management Systems)
• Harmonised Standard BS EN 13165: 2012 + A2:2016
• ISO 45001: 2018 (Occupational Health & Safety Management Systems)
Standard: To BS EN 13165.
• Fire Performance: To BS EN 13501-1:2018, Euroclass RtF F.
• Recycled Content: 0% (minimum) to BS EN ISO 14021.
• ISO 37301: 2021 (Compliance Management Systems)
• BES 6001 (Responsible Sourcing – Good)

Kingspan TR24 – Installation Guide

• The roof must be adequately protected when building works are being carried out on or over the roof surface. This is best achieved by close boarding. The completed roof must not be used for the direct storage of heavy building elements including bricks, electrical equipment, and tools.
• Insulation board should be tightly butted together to achieve the best possible thermal performance and to avoid thermal bridging and heat escaping through gaps within the insulation.
• Board should be stored on a flat surface in a weatherproof environment. Avoid standing on the boards.
• A building professional should always be consulted before and installation takes place to ensure you have the correct products and method of insulation required for your specific property.
• Protected clothing, goggles, face masks, and gloves are recommended when cutting insulation as the particles produced can irritate the skin and eyes.
• Guideline given with each product should be read and followed.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable, and the packaging should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with an opaque polythene sheet or weatherproof material.

Cutting Kingspan TR24

If you should need to cut the TR24 board this product can be cut using a hand saw. The product should be accurately measured to size and marked, if necessary, then placed on a slightly higher flat surface with room for the saw to go through the board. A ruler or plank of wood can be used for a guide and to hold the board in place when cutting. The boards can also be cut by scoring with a sharp knife, snapping, and cutting the facing on the other side.

At the completion of each day’s work, or whenever work is interrupted for extended periods of time, a night joint must be made in order to prevent water penetration into the roof construction

The post 130mm TR24 Kingspan Thermaroof Flat Roof Insulation Board (1200 x 600mm x 130mm ) – 2.16m2 pack appeared first on Trade Insulations.

Kingspan TR24 is part of the Thermaroof range designed for the insulation of flat roofs, specifically those waterproofed with fixed single-ply waterproofing. This product is compatible with flat roofs waterproofed with partially bonded torch-applied multi-layer bituminous waterproofing. The Kingspan TR46 PIR board is suitable for new builds, extensions, and refurbishments. The installation technique creates a flat roof insulation solution for fast-track building programmes.

Kingspan continues to manufacture high-quality insulation materials whilst upholding its long-term commitment to sustainability.

This board is a high-quality, rigid thermoset insulation board. The core comprises fibre-free polyisocyanurate, and the board is coated with glass tissue and finished with a Thermofusible polypropylene fleece on the upper face and coated with mineralised glass tissue on the lower face. The TR26 is 2400mm by 600mm and is available in a range of thicknesses from 30mm to 150mm. The TR24 is lightweight, making delivery, handling, cutting, and installation easy.

Key features:

• Ideal for new build and refurbishment
• Composed of non–deleterious material
• Resistant to solvents, fungi & rodents
• Installation technique is ideal for fast-track building programmes
• Compressive strength at 10% compression: 150 kPa
• Resistant to the passage of water vapour
• Installation technique is suitable for fast-track building programmes
• Multiple installation methods available
• Compatible with majority of torch applied waterproofing systems
• Resistant to the passage of water vapour

Kingspan TR24 is extremely durable and long lasting. When the product is installed correctly under the proper building regulations the product should last for as long as the building does. The TR24 is resistant to the passage of water vapour and moisture resistant, presenting the ideal product to be installed in an area that invites challenges weather conditions. This board will prevent mould, damp, and condensation from developing and will not rot even if these conditions should occur. It is also resistant to solvent, fungi, and rodents.
By insulating your roof you’re prevent heat from escaping your property through the roof. By doing so, you will be contributing to a more sustainable environment by helping to tackle climate change and prevent global warming. You will also save money on your energy bills and provide a more temperature controlled and comfortable residential or commercial property. Your property will be cooler in the summer and hotter in the winter.
Kingspan TR24 can be installed in a range of methods. These methods include:

• Dense Concrete Deck with Suspended Ceiling
• Timber Deck with Plasterboard Ceiling
• Metal Deck with No Ceiling
• Flat Roof waterproofed with partially bonded torch applied multi-layer bituminous waterproofing

Certifications:

• ISO 9001: 2015 (Quality Management Systems. Requirements)
• BS EN ISO 14001: 2015 (Environmental Management Systems)
• Harmonised Standard BS EN 13165: 2012 + A2:2016
• ISO 45001: 2018 (Occupational Health & Safety Management Systems)
Standard: To BS EN 13165.
• Fire Performance: To BS EN 13501-1:2018, Euroclass RtF F.
• Recycled Content: 0% (minimum) to BS EN ISO 14021.
• ISO 37301: 2021 (Compliance Management Systems)
• BES 6001 (Responsible Sourcing – Good)

Kingspan TR24 – Installation Guide

• The roof must be adequately protected when building works are being carried out on or over the roof surface. This is best achieved by close boarding. The completed roof must not be used for the direct storage of heavy building elements including bricks, electrical equipment, and tools.
• Insulation board should be tightly butted together to achieve the best possible thermal performance and to avoid thermal bridging and heat escaping through gaps within the insulation.
• Board should be stored on a flat surface in a weatherproof environment. Avoid standing on the boards.
• A building professional should always be consulted before and installation takes place to ensure you have the correct products and method of insulation required for your specific property.
• Protected clothing, goggles, face masks, and gloves are recommended when cutting insulation as the particles produced can irritate the skin and eyes.
• Guideline given with each product should be read and followed.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable, and the packaging should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with an opaque polythene sheet or weatherproof material.

Cutting Kingspan TR24

If you should need to cut the TR24 board this product can be cut using a hand saw. The product should be accurately measured to size and marked, if necessary, then placed on a slightly higher flat surface with room for the saw to go through the board. A ruler or plank of wood can be used for a guide and to hold the board in place when cutting. The boards can also be cut by scoring with a sharp knife, snapping, and cutting the facing on the other side.

At the completion of each day’s work, or whenever work is interrupted for extended periods of time, a night joint must be made in order to prevent water penetration into the roof construction

The post 100mm TR24 Kingspan Thermaroof Flat Roof Insulation Board (1200 x 600mm x 100mm) – 3.6m2 pack appeared first on Trade Insulations.

Kingspan TR24 is part of the Thermaroof range designed for the insulation of flat roofs, specifically those waterproofed with fixed single-ply waterproofing. This product is compatible with flat roofs waterproofed with partially bonded torch-applied multi-layer bituminous waterproofing. The Kingspan TR46 PIR board is suitable for new builds, extensions, and refurbishments. The installation technique creates a flat roof insulation solution for fast-track building programmes.

Kingspan continues to manufacture high-quality insulation materials whilst upholding its long-term commitment to sustainability.

This board is a high-quality, rigid thermoset insulation board. The core comprises fibre-free polyisocyanurate, and the board is coated with glass tissue and finished with a Thermofusible polypropylene fleece on the upper face and coated with mineralised glass tissue on the lower face. The TR26 is 2400mm by 600mm and is available in a range of thicknesses from 30mm to 150mm. The TR24 is lightweight, making delivery, handling, cutting, and installation easy.

Key features:

• Ideal for new build and refurbishment
• Composed of non–deleterious material
• Resistant to solvents, fungi & rodents
• Installation technique is ideal for fast-track building programmes
• Compressive strength at 10% compression: 150 kPa
• Resistant to the passage of water vapour
• Installation technique is suitable for fast-track building programmes
• Multiple installation methods available
• Compatible with majority of torch applied waterproofing systems
• Resistant to the passage of water vapour

Kingspan TR24 is extremely durable and long lasting. When the product is installed correctly under the proper building regulations the product should last for as long as the building does. The TR24 is resistant to the passage of water vapour and moisture resistant, presenting the ideal product to be installed in an area that invites challenges weather conditions. This board will prevent mould, damp, and condensation from developing and will not rot even if these conditions should occur. It is also resistant to solvent, fungi, and rodents.
By insulating your roof you’re prevent heat from escaping your property through the roof. By doing so, you will be contributing to a more sustainable environment by helping to tackle climate change and prevent global warming. You will also save money on your energy bills and provide a more temperature controlled and comfortable residential or commercial property. Your property will be cooler in the summer and hotter in the winter.
Kingspan TR24 can be installed in a range of methods. These methods include:

• Dense Concrete Deck with Suspended Ceiling
• Timber Deck with Plasterboard Ceiling
• Metal Deck with No Ceiling
• Flat Roof waterproofed with partially bonded torch applied multi-layer bituminous waterproofing

Certifications:

• ISO 9001: 2015 (Quality Management Systems. Requirements)
• BS EN ISO 14001: 2015 (Environmental Management Systems)
• Harmonised Standard BS EN 13165: 2012 + A2:2016
• ISO 45001: 2018 (Occupational Health & Safety Management Systems)
Standard: To BS EN 13165.
• Fire Performance: To BS EN 13501-1:2018, Euroclass RtF F.
• Recycled Content: 0% (minimum) to BS EN ISO 14021.
• ISO 37301: 2021 (Compliance Management Systems)
• BES 6001 (Responsible Sourcing – Good)

Kingspan TR24 – Installation Guide

• The roof must be adequately protected when building works are being carried out on or over the roof surface. This is best achieved by close boarding. The completed roof must not be used for the direct storage of heavy building elements including bricks, electrical equipment, and tools.
• Insulation board should be tightly butted together to achieve the best possible thermal performance and to avoid thermal bridging and heat escaping through gaps within the insulation.
• Board should be stored on a flat surface in a weatherproof environment. Avoid standing on the boards.
• A building professional should always be consulted before and installation takes place to ensure you have the correct products and method of insulation required for your specific property.
• Protected clothing, goggles, face masks, and gloves are recommended when cutting insulation as the particles produced can irritate the skin and eyes.
• Guideline given with each product should be read and followed.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable, and the packaging should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with an opaque polythene sheet or weatherproof material.

Cutting Kingspan TR24

If you should need to cut the TR24 board this product can be cut using a hand saw. The product should be accurately measured to size and marked, if necessary, then placed on a slightly higher flat surface with room for the saw to go through the board. A ruler or plank of wood can be used for a guide and to hold the board in place when cutting. The boards can also be cut by scoring with a sharp knife, snapping, and cutting the facing on the other side.

At the completion of each day’s work, or whenever work is interrupted for extended periods of time, a night joint must be made in order to prevent water penetration into the roof construction

The post 80mm TR24 Kingspan Thermaroof Flat Roof Insulation Board (1200 x 600mm x 80mm) – 4.32m2 pack appeared first on Trade Insulations.

Kingspan TR24 is part of the Thermaroof range designed for the insulation of flat roofs, specifically those waterproofed with fixed single-ply waterproofing. This product is compatible with flat roofs waterproofed with partially bonded torch-applied multi-layer bituminous waterproofing. The Kingspan TR46 PIR board is suitable for new builds, extensions, and refurbishments. The installation technique creates a flat roof insulation solution for fast-track building programmes.

Kingspan continues to manufacture high-quality insulation materials whilst upholding its long-term commitment to sustainability.

This board is a high-quality, rigid thermoset insulation board. The core comprises fibre-free polyisocyanurate, and the board is coated with glass tissue and finished with a Thermofusible polypropylene fleece on the upper face and coated with mineralised glass tissue on the lower face. The TR26 is 2400mm by 600mm and is available in a range of thicknesses from 30mm to 150mm. The TR24 is lightweight, making delivery, handling, cutting, and installation easy.

Key features:

• Ideal for new build and refurbishment
• Composed of non–deleterious material
• Resistant to solvents, fungi & rodents
• Installation technique is ideal for fast-track building programmes
• Compressive strength at 10% compression: 150 kPa
• Resistant to the passage of water vapour
• Installation technique is suitable for fast-track building programmes
• Multiple installation methods available
• Compatible with majority of torch applied waterproofing systems
• Resistant to the passage of water vapour

Kingspan TR24 is extremely durable and long lasting. When the product is installed correctly under the proper building regulations the product should last for as long as the building does. The TR24 is resistant to the passage of water vapour and moisture resistant, presenting the ideal product to be installed in an area that invites challenges weather conditions. This board will prevent mould, damp, and condensation from developing and will not rot even if these conditions should occur. It is also resistant to solvent, fungi, and rodents.
By insulating your roof you’re prevent heat from escaping your property through the roof. By doing so, you will be contributing to a more sustainable environment by helping to tackle climate change and prevent global warming. You will also save money on your energy bills and provide a more temperature controlled and comfortable residential or commercial property. Your property will be cooler in the summer and hotter in the winter.
Kingspan TR24 can be installed in a range of methods. These methods include:

• Dense Concrete Deck with Suspended Ceiling
• Timber Deck with Plasterboard Ceiling
• Metal Deck with No Ceiling
• Flat Roof waterproofed with partially bonded torch applied multi-layer bituminous waterproofing

Certifications:

• ISO 9001: 2015 (Quality Management Systems. Requirements)
• BS EN ISO 14001: 2015 (Environmental Management Systems)
• Harmonised Standard BS EN 13165: 2012 + A2:2016
• ISO 45001: 2018 (Occupational Health & Safety Management Systems)
Standard: To BS EN 13165.
• Fire Performance: To BS EN 13501-1:2018, Euroclass RtF F.
• Recycled Content: 0% (minimum) to BS EN ISO 14021.
• ISO 37301: 2021 (Compliance Management Systems)
• BES 6001 (Responsible Sourcing – Good)

Kingspan TR24 – Installation Guide

• The roof must be adequately protected when building works are being carried out on or over the roof surface. This is best achieved by close boarding. The completed roof must not be used for the direct storage of heavy building elements including bricks, electrical equipment, and tools.
• Insulation board should be tightly butted together to achieve the best possible thermal performance and to avoid thermal bridging and heat escaping through gaps within the insulation.
• Board should be stored on a flat surface in a weatherproof environment. Avoid standing on the boards.
• A building professional should always be consulted before and installation takes place to ensure you have the correct products and method of insulation required for your specific property.
• Protected clothing, goggles, face masks, and gloves are recommended when cutting insulation as the particles produced can irritate the skin and eyes.
• Guideline given with each product should be read and followed.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable, and the packaging should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with an opaque polythene sheet or weatherproof material.

Cutting Kingspan TR24

If you should need to cut the TR24 board this product can be cut using a hand saw. The product should be accurately measured to size and marked, if necessary, then placed on a slightly higher flat surface with room for the saw to go through the board. A ruler or plank of wood can be used for a guide and to hold the board in place when cutting. The boards can also be cut by scoring with a sharp knife, snapping, and cutting the facing on the other side.

At the completion of each day’s work, or whenever work is interrupted for extended periods of time, a night joint must be made in order to prevent water penetration into the roof construction

The post 50mm TR24 Kingspan Thermaroof Flat Roof Insulation Board (1200 x 600mm x 50mm) – 4.32m2 pack appeared first on Trade Insulations.

Kingspan TR24 is part of the Thermaroof range designed for the insulation of flat roofs, specifically those waterproofed with fixed single-ply waterproofing. This product is compatible with flat roofs waterproofed with partially bonded torch-applied multi-layer bituminous waterproofing. The Kingspan TR46 PIR board is suitable for new builds, extensions, and refurbishments. The installation technique creates a flat roof insulation solution for fast-track building programmes.

Kingspan continues to manufacture high-quality insulation materials whilst upholding its long-term commitment to sustainability.

This board is a high-quality, rigid thermoset insulation board. The core comprises fibre-free polyisocyanurate, and the board is coated with glass tissue and finished with a Thermofusible polypropylene fleece on the upper face and coated with mineralised glass tissue on the lower face. The TR26 is 2400mm by 600mm and is available in a range of thicknesses from 30mm to 150mm. The TR24 is lightweight, making delivery, handling, cutting, and installation easy.

Key features:

• Ideal for new build and refurbishment
• Composed of non–deleterious material
• Resistant to solvents, fungi & rodents
• Installation technique is ideal for fast-track building programmes
• Compressive strength at 10% compression: 150 kPa
• Resistant to the passage of water vapour
• Installation technique is suitable for fast-track building programmes
• Multiple installation methods available
• Compatible with majority of torch applied waterproofing systems
• Resistant to the passage of water vapour

Kingspan TR24 is extremely durable and long lasting. When the product is installed correctly under the proper building regulations the product should last for as long as the building does. The TR24 is resistant to the passage of water vapour and moisture resistant, presenting the ideal product to be installed in an area that invites challenges weather conditions. This board will prevent mould, damp, and condensation from developing and will not rot even if these conditions should occur. It is also resistant to solvent, fungi, and rodents.
By insulating your roof you’re prevent heat from escaping your property through the roof. By doing so, you will be contributing to a more sustainable environment by helping to tackle climate change and prevent global warming. You will also save money on your energy bills and provide a more temperature controlled and comfortable residential or commercial property. Your property will be cooler in the summer and hotter in the winter.
Kingspan TR24 can be installed in a range of methods. These methods include:

• Dense Concrete Deck with Suspended Ceiling
• Timber Deck with Plasterboard Ceiling
• Metal Deck with No Ceiling
• Flat Roof waterproofed with partially bonded torch applied multi-layer bituminous waterproofing

Certifications:

• ISO 9001: 2015 (Quality Management Systems. Requirements)
• BS EN ISO 14001: 2015 (Environmental Management Systems)
• Harmonised Standard BS EN 13165: 2012 + A2:2016
• ISO 45001: 2018 (Occupational Health & Safety Management Systems)
Standard: To BS EN 13165.
• Fire Performance: To BS EN 13501-1:2018, Euroclass RtF F.
• Recycled Content: 0% (minimum) to BS EN ISO 14021.
• ISO 37301: 2021 (Compliance Management Systems)
• BES 6001 (Responsible Sourcing – Good)

Kingspan TR24 – Installation Guide

• The roof must be adequately protected when building works are being carried out on or over the roof surface. This is best achieved by close boarding. The completed roof must not be used for the direct storage of heavy building elements including bricks, electrical equipment, and tools.
• Insulation board should be tightly butted together to achieve the best possible thermal performance and to avoid thermal bridging and heat escaping through gaps within the insulation.
• Board should be stored on a flat surface in a weatherproof environment. Avoid standing on the boards.
• A building professional should always be consulted before and installation takes place to ensure you have the correct products and method of insulation required for your specific property.
• Protected clothing, goggles, face masks, and gloves are recommended when cutting insulation as the particles produced can irritate the skin and eyes.
• Guideline given with each product should be read and followed.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable, and the packaging should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with an opaque polythene sheet or weatherproof material.

Cutting Kingspan TR24

If you should need to cut the TR24 board this product can be cut using a hand saw. The product should be accurately measured to size and marked, if necessary, then placed on a slightly higher flat surface with room for the saw to go through the board. A ruler or plank of wood can be used for a guide and to hold the board in place when cutting. The boards can also be cut by scoring with a sharp knife, snapping, and cutting the facing on the other side.

At the completion of each day’s work, or whenever work is interrupted for extended periods of time, a night joint must be made in order to prevent water penetration into the roof construction

The post 30mm TR24 Kingspan Thermaroof Flat Roof Insulation Board (1200 x 600mm x 30mm) appeared first on Trade Insulations.

Kingspan TR24 is part of the Thermaroof range designed for the insulation of flat roofs, specifically those waterproofed with fixed single-ply waterproofing. This product is compatible with flat roofs waterproofed with partially bonded torch-applied multi-layer bituminous waterproofing. The Kingspan TR46 PIR board is suitable for new builds, extensions, and refurbishments. The installation technique creates a flat roof insulation solution for fast-track building programmes.

Kingspan continues to manufacture high-quality insulation materials whilst upholding its long-term commitment to sustainability.

This board is a high-quality, rigid thermoset insulation board. The core comprises fibre-free polyisocyanurate, and the board is coated with glass tissue and finished with a Thermofusible polypropylene fleece on the upper face and coated with mineralised glass tissue on the lower face. The TR26 is 2400mm by 600mm and is available in a range of thicknesses from 30mm to 150mm. The TR24 is lightweight, making delivery, handling, cutting, and installation easy.

Key features:

• Ideal for new build and refurbishment
• Composed of non–deleterious material
• Resistant to solvents, fungi & rodents
• Installation technique is ideal for fast-track building programmes
• Compressive strength at 10% compression: 150 kPa
• Resistant to the passage of water vapour
• Installation technique is suitable for fast-track building programmes
• Multiple installation methods available
• Compatible with majority of torch applied waterproofing systems
• Resistant to the passage of water vapour

Kingspan TR24 is extremely durable and long lasting. When the product is installed correctly under the proper building regulations the product should last for as long as the building does. The TR24 is resistant to the passage of water vapour and moisture resistant, presenting the ideal product to be installed in an area that invites challenges weather conditions. This board will prevent mould, damp, and condensation from developing and will not rot even if these conditions should occur. It is also resistant to solvent, fungi, and rodents.
By insulating your roof you’re prevent heat from escaping your property through the roof. By doing so, you will be contributing to a more sustainable environment by helping to tackle climate change and prevent global warming. You will also save money on your energy bills and provide a more temperature controlled and comfortable residential or commercial property. Your property will be cooler in the summer and hotter in the winter.
Kingspan TR24 can be installed in a range of methods. These methods include:

• Dense Concrete Deck with Suspended Ceiling
• Timber Deck with Plasterboard Ceiling
• Metal Deck with No Ceiling
• Flat Roof waterproofed with partially bonded torch applied multi-layer bituminous waterproofing

Certifications:

• ISO 9001: 2015 (Quality Management Systems. Requirements)
• BS EN ISO 14001: 2015 (Environmental Management Systems)
• Harmonised Standard BS EN 13165: 2012 + A2:2016
• ISO 45001: 2018 (Occupational Health & Safety Management Systems)
Standard: To BS EN 13165.
• Fire Performance: To BS EN 13501-1:2018, Euroclass RtF F.
• Recycled Content: 0% (minimum) to BS EN ISO 14021.
• ISO 37301: 2021 (Compliance Management Systems)
• BES 6001 (Responsible Sourcing – Good)

Kingspan TR24 – Installation Guide

• The roof must be adequately protected when building works are being carried out on or over the roof surface. This is best achieved by close boarding. The completed roof must not be used for the direct storage of heavy building elements including bricks, electrical equipment, and tools.
• Insulation board should be tightly butted together to achieve the best possible thermal performance and to avoid thermal bridging and heat escaping through gaps within the insulation.
• Board should be stored on a flat surface in a weatherproof environment. Avoid standing on the boards.
• A building professional should always be consulted before and installation takes place to ensure you have the correct products and method of insulation required for your specific property.
• Protected clothing, goggles, face masks, and gloves are recommended when cutting insulation as the particles produced can irritate the skin and eyes.
• Guideline given with each product should be read and followed.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable, and the packaging should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with an opaque polythene sheet or weatherproof material.

Cutting Kingspan TR24

If you should need to cut the TR24 board this product can be cut using a hand saw. The product should be accurately measured to size and marked, if necessary, then placed on a slightly higher flat surface with room for the saw to go through the board. A ruler or plank of wood can be used for a guide and to hold the board in place when cutting. The boards can also be cut by scoring with a sharp knife, snapping, and cutting the facing on the other side.

At the completion of each day’s work, or whenever work is interrupted for extended periods of time, a night joint must be made in order to prevent water penetration into the roof construction

The post 120mm TR24 Kingspan Thermaroof Flat Roof Insulation Board (1200 x 600mm x 120mm) – 2.88m2 pack appeared first on Trade Insulations.

Kingspan GreenGuard 50mm GG500 is a high-performance, rigid insulation board made up of extruded polystyrene designed for exterior insulation, including the insulation of inverted roofs, basements, car park decks, and heavy-duty commercial, industrial, and cold store flooring. The GG500 boards have excellent compressive strength and a closed cell structure that is moisture resistant and rejects the absorption of groundwater and the passage of water vapour.

Key Features:

• High-performance rigid extruded polystyrene insulation with low thermal conductivity.
• High compressive strength.
• Resistant to ground moisture penetration
• Easy to handle and install.
• Rebated Edges
• Compressive strength (minimum) at 10% compression – 300kPa
• Fibre-free rigid extruded polystyrene insulant
• Resistant to most dilute acids and alkalis
• Available for new builds or refurbishments

The Kingspan GreenGuard brand selection offers extruded polystyrene (XPS) insulation boards in a range of sizes, air barrier building wraps and accessories, including flashing.
The XPS insulation board offers an R–value of 5.0 per inch of thickness and is the ideal product for a variety of applications including below slab, below grade along the foundation, inside basement walls, exterior insulation over wood sheathing and residing.
Rigid extruded polystyrene insulation (XPS) can also be used as general-purpose insulation for multiple applications including, roofing, wall and foundation applications requiring a minimum compressive strength.
Continuous insulation for above grade walls, as well as below grade walls and floors provides an extra barrier against moisture infiltration.
Each insulation product achieves the necessary fire performance for its intended application.

GreenGuard products are easily identifiable by their bright green colour. In addition to creating healthier, durable, and cost-efficient assemblies, GreenGuard products can help projects to meet environmental building certification requirements.

Cutting:

Kingspan Greenguard GG500 can be cut by measuring and marking to board to ensure an accurate fit and cutting with a fine-toothed saw on higher surface to allow the saw to cut through. Other ways to cut GG500 is to use a hot wire system or by scoring with a sharp knife and snapping the board over a edge and scoring the other side if necessary. Ensure accurate trimming to accomplish close-butting joints and continuity of insulation to avoid thermal bridging.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable and packaging materials should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with a pale pigmented polythene sheet or weatherproof material. Kingspan GreenGuard should not be left exposed to the sun covered by either a transparent or a dark plastic sheet. In both cases the temperature of the board can build up and alter the board dimensions or warp them.

Please note Kingspan GreenGuard may be delivered in packaging showing alternative branding.

Kingspan Greenguard GG500 installation methods –

• Inverted roofs
• Basements
• Car park decks
• Heavy-duty commercial
• Industrial and cold store flooring
Suitable for new builds and refurbishments

Please see below our Kingspan Greenguard GG500 Insulation Board datasheet and safety regulations

Safety Certifications:

The post 50mm Kingspan Greenguard GG500 600mm x 1250mm – 6m2 pack – 50mm GG500 appeared first on Trade Insulations.

Kingspan GreenGuard 60mm GG500 is a high-performance, rigid insulation board made up of extruded polystyrene designed for exterior insulation, including the insulation of inverted roofs, basements, car park decks, and heavy-duty commercial, industrial, and cold store flooring. The GG500 boards have excellent compressive strength and a closed cell structure that is moisture resistant and rejects the absorption of groundwater and the passage of water vapour.

Key Features:

• High-performance rigid extruded polystyrene insulation with low thermal conductivity.
• High compressive strength.
• Resistant to ground moisture penetration
• Easy to handle and install.
• Rebated Edges
• Compressive strength (minimum) at 10% compression – 300kPa
• Fibre-free rigid extruded polystyrene insulant
• Resistant to most dilute acids and alkalis
• Available for new builds or refurbishments

The Kingspan GreenGuard brand selection offers extruded polystyrene (XPS) insulation boards in a range of sizes, air barrier building wraps and accessories including flashing.
The XPS insulation board offers an R–value of 5.0 per inch of thickness and is the ideal product for a variety of applications including below slab, below grade along the foundation, inside basement walls, exterior insulation over wood sheathing and residing.
Rigid extruded polystyrene insulation (XPS) can also be used as general-purpose insulation for multiple applications including, roofing, wall and foundation applications requiring a minimum compressive strength.
Continuous insulation for above grade walls, as well as below grade walls and floors provides an extra barrier against moisture infiltration.
Each insulation product achieves the necessary fire performance for its intended application.

GreenGuard products are easily identifiable by their bright green colour. In addition to creating healthier, durable, and cost-efficient assemblies, GreenGuard products can help projects to meet environmental building certification requirements.

Cutting:

Kingspan Greenguard GG500 can be cut by measuring and marking to board to ensure an accurate fit and cutting with a fine-toothed saw on higher surface to allow the saw to cut through. Other ways to cut GG500 is to use a hot wire system or by scoring with a sharp knife and snapping the board over a edge and scoring the other side if necessary. Ensure accurate trimming to accomplish close-butting joints and continuity of insulation to avoid thermal bridging.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable and packaging materials should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with a pale pigmented polythene sheet or weatherproof material. Kingspan GreenGuard should not be left exposed to the sun covered by either a transparent or a dark plastic sheet. In both cases the temperature of the board can build up and alter the board dimensions or warp them.

Please note Kingspan GreenGuard may be delivered in packaging showing alternative branding.

Kingspan Greenguard GG500 installation methods –

• Inverted roofs
• Basements
• Car park decks
• Heavy-duty commercial
• Industrial and cold store flooring
Suitable for new builds and refurbishments

Please see below our Kingspan Greenguard GG500 Insulation Board datasheet and safety regulations

Safety Certifications:

The post 60mm Kingspan Greenguard GG500 600mm x 1250mm – 5.25m2 pack – 60mm GG500 appeared first on Trade Insulations.

Kingspan GreenGuard 80mm GG500 is a high-performance, rigid insulation board made up of extruded polystyrene designed for exterior insulation, including the insulation of inverted roofs, basements, car park decks, and heavy-duty commercial, industrial, and cold store flooring. The GG500 boards have excellent compressive strength and a closed cell structure that is moisture resistant and rejects the absorption of groundwater and the passage of water vapour.

Key Features:

• High-performance rigid extruded polystyrene insulation with low thermal conductivity.
• High compressive strength.
• Resistant to ground moisture penetration
• Easy to handle and install.
• Rebated Edges
• Compressive strength (minimum) at 10% compression – 300kPa
• Fibre-free rigid extruded polystyrene insulant
• Resistant to most dilute acids and alkalis
• Available for new builds or refurbishments

The Kingspan GreenGuard brand selection offers extruded polystyrene (XPS) insulation boards in a range of sizes, air barrier building wraps and accessories including flashing.
The XPS insulation board offers an R–value of 5.0 per inch of thickness and is the ideal product for a variety of applications including below slab, below grade along the foundation, inside basement walls, exterior insulation over wood sheathing and residing.
Rigid extruded polystyrene insulation (XPS) can also be used as general-purpose insulation for multiple applications including, roofing, wall and foundation applications requiring a minimum compressive strength.
Continuous insulation for above grade walls, as well as below grade walls and floors provides an extra barrier against moisture infiltration.
Each insulation product achieves the necessary fire performance for its intended application.

GreenGuard products are easily identifiable by their bright green colour. In addition to creating healthier, durable, and cost-efficient assemblies, GreenGuard products can help projects to meet environmental building certification requirements.

Cutting:

Kingspan Greenguard GG500 can be cut by measuring and marking to board to ensure an accurate fit and cutting with a fine-toothed saw on higher surface to allow the saw to cut through. Other ways to cut GG500 is to use a hot wire system or by scoring with a sharp knife and snapping the board over a edge and scoring the other side if necessary. Ensure accurate trimming to accomplish close-butting joints and continuity of insulation to avoid thermal bridging.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable and packaging materials should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with a pale pigmented polythene sheet or weatherproof material. Kingspan GreenGuard should not be left exposed to the sun covered by either a transparent or a dark plastic sheet. In both cases the temperature of the board can build up and alter the board dimensions or warp them.

Please note Kingspan GreenGuard may be delivered in packaging showing alternative branding.

Kingspan Greenguard GG500 installation methods –

• Inverted roofs
• Basements
• Car park decks
• Heavy-duty commercial
• Industrial and cold store flooring
Suitable for new builds and refurbishments

Please see below our Kingspan Greenguard GG500 Insulation Board datasheet and safety regulations

Safety Certifications:

The post 80mm Kingspan Greenguard GG500 600mm x 1250mm – 3.75m2 pack – 80mm GG500 appeared first on Trade Insulations.

Kingspan GreenGuard 100mm GG500 is a high-performance, rigid insulation board made up of extruded polystyrene designed for exterior insulation, including the insulation of inverted roofs, basements, car park decks, and heavy-duty commercial, industrial, and cold store flooring. The GG500 boards have excellent compressive strength and a closed cell structure that is moisture resistant and rejects the absorption of groundwater and the passage of water vapour.

Key Features:

• High-performance rigid extruded polystyrene insulation with low thermal conductivity.
• High compressive strength.
• Resistant to ground moisture penetration
• Easy to handle and install.
• Rebated Edges
• Compressive strength (minimum) at 10% compression – 300kPa
• Fibre-free rigid extruded polystyrene insulant
• Resistant to most dilute acids and alkalis
• Available for new builds or refurbishments

The Kingspan GreenGuard brand selection offers extruded polystyrene (XPS) insulation boards in a range of sizes, air barrier building wraps and accessories including flashing.
The XPS insulation board offers an R–value of 5.0 per inch of thickness and is the ideal product for a variety of applications including below slab, below grade along the foundation, inside basement walls, exterior insulation over wood sheathing and residing.
Rigid extruded polystyrene insulation (XPS) can also be used as general-purpose insulation for multiple applications including, roofing, wall and foundation applications requiring a minimum compressive strength.
Continuous insulation for above grade walls, as well as below grade walls and floors provides an extra barrier against moisture infiltration.
Each insulation product achieves the necessary fire performance for its intended application.

GreenGuard products are easily identifiable by their bright green colour. In addition to creating healthier, durable, and cost-efficient assemblies, GreenGuard products can help projects to meet environmental building certification requirements.

Cutting:

Kingspan Greenguard GG500 can be cut by measuring and marking to board to ensure an accurate fit and cutting with a fine-toothed saw on higher surface to allow the saw to cut through. Other ways to cut GG500 is to use a hot wire system or by scoring with a sharp knife and snapping the board over a edge and scoring the other side if necessary. Ensure accurate trimming to accomplish close-butting joints and continuity of insulation to avoid thermal bridging.

Packaging and Storage:

The polyethylene packaging of Kingspan Insulation products is fully recyclable and packaging materials should not be considered sufficient for outside protection. The boards should be stored on a flat surface inside a well-ventilated building. If, however, indoor storage is not an option, then the boards should be stacked clear of the ground and protected with a pale pigmented polythene sheet or weatherproof material. Kingspan GreenGuard should not be left exposed to the sun covered by either a transparent or a dark plastic sheet. In both cases the temperature of the board can build up and alter the board dimensions or warp them.

Please note Kingspan GreenGuard may be delivered in packaging showing alternative branding.

Kingspan Greenguard GG500 installation methods –

• Inverted roofs
• Basements
• Car park decks
• Heavy-duty commercial
• Industrial and cold store flooring
Suitable for new builds and refurbishments

Please see below our Kingspan Greenguard GG500 Insulation Board datasheet and safety regulations

Safety Certifications:

The post 100mm Kingspan Greenguard GG500 600mm x 1250mm – 3m2 pack – 100mm GG500 appeared first on Trade Insulations.